Safety Instructions - Honeywell ACC 50 Operating Instructions Manual

12
Contents
1. Safety instructions .............................................................................................................12
2. Appl i cation / functi o ns........................................................................................................13
3. Handling of the ID cards....................................................................................................13
4. Functions of the programmi n g card set ..............................................................................14
5. DIP switch posi t ions ..........................................................................................................15
6. Operational status i n dicators ..............................................................................................16
7. Time zones .......................................................................................................................17
8. Authorization / disabling of ID cards ...................................................................................18
9. Technical data...................................................................................................................19
10. Dimensions.......................................................................................................................19
11. Using the device correctly..................................................................................................19
12. EC-Declarati o n of Conformity.............................................................................................20
1.

Safety instructions

Please read this manual carefully and completely before installing and
with this unit. This manual contains important information on mounting, programming
and operation.
Only use the unit
- according to the designated use
- in technically perfect and correctly installed condition
- according to the technical data
The manufacturer cannot be held liable for damage resulting from use contrary to the
designated purpose.
Keep your programming cards on a safe place to avoide manipulated
access rights.
Installation,
and trained persons.
Soldering and connecting work can only be carried out when disconnected from mains.
Soldering work must only be performed with a temperature-regulated soldering iron
galvanically separated from the mains.
The safety regulations by VDE and the prescriptions of the local power utility have to be
observed.
Gefahr: The operation unit must no be used in explosion endangered environment or
in rooms with metal- and plastic-decomposing vapours.
Disposal: The packing is produced of the following recycling material:
cardboard, polystyrene PS, polyethylene PE.
.
maintenance and repair work must be carried out only by authorized
Operating Instructions ACC50
starting to work
.
Page