Hitachi HF-BX1000 Instruction Manual page 77

Industrial computer
Table of Contents

Advertisement

3. OPERATION
 Notes about the case when link down is recorded in the log during OS startup.
While Windows® is starting, the following warnings may be displayed in the event log.
These warnings are recorded by the initialization process of the LAN driver at the startup of
Windows® and will not cause any problems in the system operation.
Event ID
Source
27
e1qexpress
27
e1rexpress
(*) How the name is displayed differs depending on the LAN adapter.
You can keep these warnings from being displayed in the event log by changing the LAN
adapter settings as follows.
Note that if you change the settings shown below, log entries such as LAN connection and
disconnection during system operation are also not recorded and that may make failure
analysis difficult when a problem occurs.
1. Execute steps 1 though 7 in " Setting the network transfer speed" in "3.7 Setting Up
the LAN Interface".
2. Click the Advanced tab. Select Log Link State Event. Select Disabled from the Value
list.
Type
Category
Warning
None
Warning
None
3-16
Description
Intel(R) 82579LM Gigabit Network Connection (*)
A network link has been lost.
Intel(R) 82583V Gigabit Network Connection (*)
A network link has been lost.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hf-bx1200

Table of Contents