Figure 1-7 Hf-Bx1000 Installation Requirements (Vertical Installation); Figure 1-8 Hf-Bx1200 Installation Requirements (Vertical Installation) - Hitachi HF-BX1000 Instruction Manual

(c) Vertical installation
When you install the equipment vertically, install fixing bracket attached and the
power supply unit must come at the upper side and make sure the equipment
is placed so it does not fall. If you do not, may result of injury.
The mounting metal fitting for vertical installation must be secured to a
mounting chassis or rack with casters using set screws at both the upper and
lower positions.
Mounting Metal Fitting
for Vertical Installation
Use a steel plate.
The thickness must be
3mm or more.

Figure 1-7 HF-BX1000 installation Requirements (Vertical installation)

Mounting Metal Fitting
for Vertical Installation
Use a steel plate.
The thickness must be
3mm or more.

Figure 1-8 HF-BX1200 installation Requirements (Vertical installation)

88mm or more
143mm or more
CAUTION
1-7
1. GETTING STARTED
Screws
(Prepared by users)
Screws
(Prepared by users)