Figure 7-29 Ctu(C)-U Unit; Ctu(C)-U Unit Connections - NEC ElectraElite 48 System Hardware Manual

Electra Elite
System Hardware Manual
Plug and Play Support
Headset Operation
When CTU and TAPI are used to set data for TSP, the
headset button can be controlled by TSP.
USB Interface
This adapter uses Full Speed (12Mbps) as defined in the
USB Specification.
3.6.1

CTU(C)-U Unit Connections

This Computer Telephony adapter connects a Universal
Serial Bus to a Coreline port on the VDH2(8)-U( ) ETU
and can be connected to any DTP/DTU Multiline Terminal
except DTP-2DT-1 and DTP-16HC-1.
A required AC Adapter is provided with the unit.
The following connections are required:
AC Adapter
Multiline Terminal jack labeled LINE
PC USB port
Coreline interface to VDH2(8)-U( ) ETU
LAN cable to PC
To DTP or DTU Multiline Terminal
DC 24V (ADP)
USB Cable to PC
To VDH Port
To PC NIC Card

Figure 7-29 CTU(C)-U Unit

Issue 6
7 - 23