Electra Elite
System Hardware Manual
5.10.3 Switch Settings
Refer to
for Revision Q26031 v 6.65.
For Revision Q05631 v 6.68 or Higher, refer to
VMS Dip Switch
Switch
1
2
3
4
Table 5-47 VMS Dip Switch Functions
DIP
DIP
DIP
DIP
1
2
3
4
ON
ON
ON
ON
ON
ON
ON
ON
ON
Used for Revision Q05631 v 6.68 or Higher
Table 5-46 VMS(2)/(4)/(8)-U( ) ETU Switch Settings
Functions.
Table 5-46 VMS(2)/(4)/(8)-U( ) ETU Switch Settings
Normally Off
On to enable COM1
Normally Off
When 1 and 2 are both On, COM1 is enabled
for HOSTKEY and the VM application is
stopped for Maintenance
On to enable COM2 for remote RS-232/RJ-11
Off to allow COM1 local connection
Utility Menu
Description
To enable HostKey and run Manufacturing Test
(NEC Production only
To enable HostKey with floppy disk redirection and
run Manufacturing Test (NEC Production only
To connect to CoSession using modem instead of
direct cable connection
To start BRU Host with direct cable connection
To start BRU Host with modem connection
To connect to CoSession using direct cable
connection but not start voice mail software
(Troubleshooting or Maintenance Mode)
Issue 6
Table 5-47
Description
5 - 97