GE Network Series Installation And Startup page 15

L 60 SIA
OCATION
This location contains the SIA or Contact ID account number. Contact your usual source of
account number and dial number for installations.
It is important to add leading zeros to create a 16-digit number.
L 61 P
OCATION HONE
This location contains the phone line receiver number associated with this account. Contact your
usual source of account number and dial number for installations.
L 62 L
OCATION INE
This location contains the line number associated with this account. Contact your usual source
of account number and dial number for installations. If you have a Sure-Gard receiver with line
A, enter as line 11.
L 63 T
OCATION IMERS AND
This location sets the number of attempts and the number of seconds to access the network.
Ordinarily, these segments should not be changed. The defaults are balanced to provide a
number of network attempts that satisfy UL requirement if the alarm must be dialed back. The
unit will make the number of attempts in Segment 1 until the number of seconds in Segment 2 is
exhausted. If UL Polling is turned on, the time is this number plus 30 seconds. The default will
yield a polling time of less than 90 seconds under most conditions.
Segment 1
Segment 2
Segment 3
L 63 - 94
OCATIONS
NX-590E Internet Interface
C ID A
OR ONTACT CCOUNT
L R N
INE ECEIVER
N (4
UMBER SEGMENTS
C
OUNTERS
Number of network attempts (Factory default is 2)
Time in seconds for overall network attempt
(
Polling time in seconds (Factory default is 10)
R
ESERVED
N (16
UMBER
(4
UMBER SEGMENTS DECIMAL DATA
D D
ECIMAL ATA
(3
SEGMENTS DECIMAL DATA
Minimum 30 seconds. Factory default is 30)
SEGMENTS HEX DATA
)
)
)
)
15