Activating And Setting The Vehicle Speed; Adjusting The Vehicle Speed; Adjusting The Vehicle Distance; During Operation - Honda Pilot 2020 Owner's Manual For Quick Reference

DRIVING

Activating and Setting the Vehicle Speed

n
1. Press the MAIN button. The ACC
indicator appears.
2. Accelerate to the desired speed.
mph (40 km/h): Take your
Above 25
foot off the pedal and press the SET
button to set the speed.

Adjusting the Vehicle Speed

n
Increase or decrease the vehicle speed using the RES/+ or SET/– button on
the steering wheel.
144 |
• Each time you press the RES/+ or
–/SET button, the vehicle speed is
increased or decreased by about 1
mph or 1 km/h accordingly.
• If you press and hold the RES/+ or
–/SET button, the vehicle speed
increases or decreases by about 5
mph or 5 km/h accordingly.

Adjusting the Vehicle Distance

n
Press the Interval button to change the
ACC with Low Speed Follow following-
interval. Each time you press the
button, the following-interval setting
cycles through extra long, long, middle,
and short following-intervals.

During Operation

n
ACC monitors if a vehicle ahead of you enters the ACC range. If a vehicle is
detected doing so, the ACC with Low Speed Follow system maintains or
decelerates your vehicle's set speed in order to keep the vehicle's set
following-interval from the vehicle ahead.
If a vehicle detected ahead of you
slows down abruptly or if another
vehicle cuts in front of you, the beeper
sounds and a message appears on the
driver information interface. Depress
the brake pedal, and keep an
appropriate interval from the vehicle
ahead.
Improper use of ACC with Low Speed Follow can lead to a crash.
Use ACC with Low Speed Follow only when driving on expressways or
freeways and in good weather conditions.
DRIVING
| 145