Committing Values - ABB Relion 630 Series Operation Manual

Section 4
Using the HMI
4.2.7
72
• If the entered value is within the accepted value range, the selection is
highlighted in green. If the value is out of range, the row is highlighted in
red and a warning dialog box is displayed.
• If writing values fails, a warning dialog box is displayed.
GUID-0FBEF9BB-2374-4E5A-B4F6-210FBC302E62 V1 EN
Figure 63:
If writing is enabled accidentally, click Disable Write. Disable Write cannot be
selected, when a value has already been written to the IED. After clicking Write to
IED, click either Commit or Reject.

Committing values

Editable values are stored in the non-volatile flash memory. Values stored in the flash
memory are in effect also after reboot.
1. Edit setting values.
2. Click Write to IED.
The values are written into the IED, but not taken into use.
Warning indicating that the values were not written to the
IED
PML630/Compact Load-Shedding Solution
1MRS757183 F
Operation Manual