Advertisement
•
Slide the base plate (A) to the underside of the faucet.
•
Apply adequate plumbers putty or sealant along the boundary of
the base plate (A) if necessary.
•
Clean the mounting surface If necessary.
•
Insert the faucet through sink hole.
•
Thread the mounting bolt (B) into the faucet from beneath.
•
Slide the mounting plate (C) through the mounting bolt.
•
Thread the mounting nut (D) from underside. Secure the faucet to the
sink with mounting nut (D) supplied with the faucet.
•
Remove the excess plumbers putty or sealant from the faucet.
Faucet Installation
3
REV-01 14, 13
Advertisement
