Samsung API Ultimate Performance UP1100 Quick Start Installation Manual

www.alpha-processor.com
B
Unpack & Set Up
The UP1100 Kit from Alpha Processor, Inc. is a single processor system.
It uses one Alpha 21264A Processor.
Remove the components carefully from their cartons and anti-static packaging bags.
Always take appropriate electrostatic discharge safety measures when handling
boards or modules.
Contents of the UP1100 Kit are:
Hardware
• UP1100 Standard ATX Motherboard
Documentation
• Installation Guide
• Product Warranty Card
• Read Me First Sheet
• UP1100 User Manual
Software
• UP1100 Installation Diskette
Components
Prepare for the UP1100 installation with the following components:
Level 1 – Required to Test UP1100
Power Supply(s) Memory Modules
Video Card Monitor
Keyboard Mouse
Assorted Peripheral Cables Floppy Disk Drive
+ Level 2 – Required to Load Operating System
CD Drive UP1100 Installation Diskette
A
Fan Power Connectors
UP1100
Alpha 21264A
Processor Fan Power
Quick Start
Installation Guide
Bus Connectors
32-Bit PCI (3 Slots)
Internal I/O Connectors
Keyboard Lock
HDD Activity LED
System Fan Power
System LEDs
51-0047-1A
C
Locate Chassis Features
• Identify the
Hard Disk
• Identify the ATX Core Design #6 I/O Shield.
Speaker
The chassis shown is an Axxion Model DL-17,
using the I/O shield RFIFS-D17DK (ATX Core Design #6).
Operating System CD
Tour of UP1100 Board
(Section F)
(Section G)
AGP (1 Slot)
(Section F)
Power Button
Reset Button
Power LED
Speaker
Enclosure Assembly
nine standard ATX mounting holes.
D
Chassis Assembly
Board Chassis Assembly
Requirements for attaching board to the chassis are:
• Fastening Hardware – Assorted standoffs, screws, and miscellaneous hardware supplied
by chassis vendor
• Tools – Phillips head screwdriver, Flat head screwdriver, torque wrench
Use this mounting technique:
1. Install I/O shield.
2. Secure board to the chassis with the standoffs and screws supplied by the chassis vendor.
Rear Panel I/O Connectors
(Section I)
Keyboard & Mouse (stacked)
Dual USB (stacked)
Parallel
Serial COM1
Serial COM2
LAN (Ethernet)
Audio In/Out (stacked)
MIC In
Memory Module Slots
(Section E)
DIMMs (3 Slots)
Minimum System: 64 Mbytes
Maximum System: 768 Mbytes
Power Connector
(Section G)
ATX Power
Disk Port Connectors
(Section H)
IDE (Primary Channel)
IDE (Secondary Channel)
Floppy Diskette