Sony BKDW-515 Installation And Maintenance Manual page 20

3-1. ITEM-F Series
ITEM DATA
No. ITEM No.
F13 TRACKING 0
CONTROL VIA 1
SEARCH DIAL
F15 ANALOG TAPE 0
LTC INSERT 1
F16 DEVICE TYPE 0000
MODIFY:0H 0001
FFFF
3-2
Description
DATA
off Select whether the tracking control operation with search dial is enabled or not
on during DT head playback.
This item is prepared exclusively for DT adjustment and tracking adjustments.
After adjustment is completed, return to the factory setting '0 (off)'.
0: Tracking control function is disabled during DT head playback.
1: Tracking control function is enabled by rotating the search dial during PLAY
mode.
disable Enables LTC to be inserted in an analog tape (Betacam SP)
enable 0: Inhibits insertion of LTC in an analog tape (factory setting)
1: Enables LTC to be inserted in an analog tape
Note:
When set to "enable", TC insert operation is executed even though the REC inhibit
tab of an analog tape used is set to REC INHIBIT.
0 Determines the response data for the 9 pin remote command
1 DEVICE TYPE REQUEST (00h, 11h).
| | 0000: Returns the original device type data of the DVW.
FFFF Except 0000: Returns the values numeric as it is.
The higher-order two digits are DATA-1.
The lower-order two digits are DATA-2.
Note:
The whole operations of the VTR including TTP is not influenced at all even if this
item is set to "0000" or "except 0000".
For except DATA: 0000 (factory setting), the control from 9 pin is not guaranteed.
BKDW-515