Masking Part Of A Key - Sony MKS-2010 User Manual

Masking Part of a Key

84
Composing Video With Keys
The popup window closes.
3
Set the following parameters, depending on what you selected in step 2.
When Border or Outline was selected (with the separate edge function
(see page 105) being off):
Knob Description
1 (Width) Width
2 (Density) Density
a) 0 to 4 in 4H mode or when fine key (see page 105) is on.
b) When pattern key is selected as the key type.
When Border or Outline was selected (with the separate edge function
(see page 105) being on):
Knob Description
1 (Left) Left edge position
2 (Right) Right edge position 0 to 8
3 (Top) Top edge position
4 (Bottom) Bottom edge
position
5 (Density) Key density
a) 0 to 4 in 4H mode or when fine key (see page 105) is on.
When Drop Border or Shadow was selected:
Knob
1 (Width)
2 (Position)
3 (Density)
a) 0 to 4 in 4H mode or when fine key (see page 105) is on.
b) 1 to 8 when fine key (see page 105) is on.
To add color to the key edges
1
From the top menu, select Key >M/E Key1 >Main, and press [Edge Color].
A popup window appears.
2
Press the button for the color that is closest to the desired color, and adjust
the parameters with the knobs.
See "To adjust the key fill color" (page 80) for the parameters.
A mask is used to cover part of the video with background or a key. This allows
you to correct for unwanted holes in the background or a key that is not cut out
in the desired way.
Setting values
a)
0 to 8 (0.00 to 100.00)
0.00 to 100.00
Setting values
a)
0 to 8
a)
a)
0 to 8
a)
0 to 8
0.00 to 100.00
Description Setting values
Width
0 to 8
Position
1 to 3
Density 0.00 to 100.00
b)
a)
b)