5.3.5 Control boards
a) SCNT board
• The SCNT board stores the user data, service data, and other data. Therefore, when replacing the SCNT
board, print out the stored data and then enter this data into the new SCNT board.
The SCNT board replacement precaution is described in "5.4.3 SCNT board replace-
ment precautions" on Page 1-37.
REFERENCE
b) Power supply unit
• Current fuses FU101 on the power supply unit are directly attached. If these fuses must be replaced, we
recommend replacing them together with the power supply unit.
• The power supply unit's adjustable volume VR201, VR202 has been factory-adjusted. Service person-
nel are not to alter its setting.
Do not plug the unit into an uninterruptible power supply (UPS).
Doing so may result in damage to the fixing ass'y.
FAX-L260i Chapter 1: General Description
1-33