Honeywell ControlEdge 900R04-0200 Getting Started page 112

Chapter 6 - Communication
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Configure and commission FDAP and field device - online
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16
112
Task
Configure ISA100
network ID.
Import DD files.
Add wireless I/O
devices.
Configure channels for
wireless I/O devices.
Bind channels to I/O
variables.
Configure wireless I/O
diagnostic parameters
Download the project.
Enable over-the-air
provisioning for the
controller.
Accept un-provisioned
FDAPs.
Enable over-the-air
provisioning for FDAPs.
Configure field devices.
Accept un-provisioned
field devices.
Bind wireless I/O
devices to field devices.
Activate channels for
Go to
See "Configuring the ISA100 wireless network" >
"Configuring ISA100 network ID" in the
ControlEdge Builder User's Guide.
See "Importing DD files" in the ControlEdge
Builder User's Guide.
See "Adding wireless I/O devices" in the
ControlEdge Builder User's Guide.
See "Configuring channels" in the ControlEdge
Builder User's Guide.
See "Binding channels to I/O variables" in the
ControlEdge Builder User's Guide.
See "Configuring wireless I/O diagnostic
parameters" in the ControlEdge Builder User's
Guide.
See "Downloading a project to the controller" on
page 68 for more information.
See "Enabling over-the-air provisioning" in the
ControlEdge Builder User's Guide.
See "Provisioning the devices using over-the-air
provisioning method" in the ControlEdge Builder
User's Guide.
See "Enabling over-the-air provisioning" in the
ControlEdge Builder User's Guide.
See "Configuring field devices" and "Configuring
field device channels" in the ControlEdge Builder
User's Guide.
See "Provisioning the devices using over-the-air
provisioning method" in the ControlEdge Builder
User's Guide.
See "Binding and unbinding field devices to
wireless I/O devices" in the ControlEdge Builder
User's Guide.
See "Activating channels" in the ControlEdge