Ip Terminal Autoconfig Setup; Introduction; Figure 2-1 Network Operation And Topology - NEC UX5000 Resource Manual

IP Terminal AutoConfig Setup

I
S 1
NTRODUCTION
ECTION
This chapter describes the operation of the Auto Configuration File
application for UX5000 IP Value, Enhanced or IP-CTS terminals. To
access these screens, click the Auto Config button from the IP Phone
Manager main screen.
Figure 2-1 Network Operation and Topology
describe the process that the IP terminal uses to automatically configure
itself using common network devices (Plug and Play).
UX5000 IP Resource Manual
Figure 2-1 Network Operation and Topology
and the steps that follow
2
2 - 1