Requirements, Warnings And Limitations; Harness Preparation - Honeywell Miller AirCore Oil & Gas Harness User Instruction Manual Supplement

3.0 Requirements, Warnings
and Limitations
Users must read, understand and follow all requirements, warnings and limitations
provided in the Miller Harnesses and Body Belts instruction manual (I119) as well as this
supplement.
Fall protection connecting devices should be attached to the back D-ring or back D-ring
extension. A front D-ring may be used for fall arrest only in applications where the per-
sonal fall arrest system limits the maximum free fall distance to 2 ft. (0.6m) and limits the
maximum arrest force to 900 lbs. (4kN).
The back waist level D-ring is designed for restraint applications only.
A personal fall arrest system must be in place and connected at all times when either the
bosun chair or seat sling are in use.
The seat sling is designed for short, temporary support and assistance while climbing.
Use bosun chair and seat sling D-rings only for positioning during suspended work or
assisted climbing.
Always ensure that there is adequate fall clearance for the application. Remember that
the use of the D-ring extension will add 18 in. (458mm) to the fall clearance required.

4.0 Harness Preparation

Use r I nstru cti on Ma nu al Supp lem ent - En gl i sh
6