Sony ZS-2000 Primary Operating Instructions Manual page 20

Setting the time signal (continued)
20
The Timer
4
Press TUNE•TIME SET + or – to select the time for
the time signal function to work, and then press
DISPLAY•ENTER MEM.
Display
Off
Every Hour
Auto
Once a Day*
* If you selected "Wall Clock" in step 2, you cannot select
"Once a Day"
5
If you selected "Once a Day" in step 4, set the time
for the time signal to sound. (If you selected other
items in step 4, omit this step.)
1 Press TUNE•TIME SET + or – to set the hour
and press DISPLAY•ENTER MEM.
2 Press TUNE•TIME SET + or – to set the minutes
and press DISPLAY•ENTER MEM.
To check the sound types (demonstration mode)
Press and hold TIME SIGNAL for about 2 seconds.
You can hear the five types of sound once.
Time signal sounds
Not at all
All day
7:00 a.m. - 10:00 p.m.
Once a day