Cleaning The Warming Drawer - GE PKW7000 Series Owner's Manual & Installation Instructions

Cleaning The Warming Drawer

Painted Or Enameled Surfaces
Rack
Clean the rack with detergent and water. After cleaning,
rinse the rack with clean water and dry with a clean cloth.
Stainless Steel - Excluding Black Stainless Steel (on some models)
To clean the stainless steel surface, use warm sudsy
water or a stainless steel cleaner or polish. Always wipe
the surface in the direction of the grain. Follow the cleaner
instructions for cleaning the stainless steel surface.
Control Knob
The control knob may be removed for easier cleaning.
Make sure the knob is in the PROOF position and pull it
straight off the stem for cleaning.
49-2000658 Rev. 0
Cleanser™ will remove surface rust, tarnish and small
the direction of the brush lines with a damp, soft sponge.
To inquire about purchasing cleaning products including
stainless steel appliance cleaner or polish, see the
Accessories and Consumer Support sections at the end of
this manual.
The knob can be cleaned in a dishwasher or it may also
be washed with soap and water. Make sure the inside of
the knob is dry before replacing.
Replace the knob in the PROOF position to ensure
proper placement.
9