Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Armature (cont.)
DISASSEMBLING
(3) Separate Armature assembly from Bearing box and remove Ball bearings from Armature shaft as drawn in Fig. 3.
Fig. 3
1. Hold Bearing box at the U-formed portion
on the turn table of Arbor press.
And then put 1R027 onto Ball bearing 629DDW
of Armature ass'y.
1R027
Ball bearing
629DDW
3. Remove Ball bearings from Armature shaft using 1R269 and Water pump pliers.
Note: There are little space between Ball bearing 606ZZ and Insulation washer
629DDW and Washer 9
Therefore, hold the jaws of 1R269 with Water pump pliers to retain Ball bearing securely.
Temporarily tighten M4x18 Pan head screw to Armature shaft to protect the female thread when
removing Ball bearing 629DDW
Fig. 3-A
3-B).
(Fig.
3-B).
(Fig.
Water pump pliers
1R269
Insulation
washer
Ball bearing
606ZZ
2. Press Ball bearing 629DDW with 1R027.
Armature ass'y is now removed from
Bearing box.
Fig. 3-B
M4x18 Pan
head screw
(Fig.
3-A)/ Ball bearing
Washer 9
Ball bearing
629DDW
P 4/ 7
Advertisement
