Compensating For The Input Signals - Sony UP-2100 Operating Instructions Manual

Compensating for the Input Signals

A video image recorded under poor conditions may be of poor color quality. If the
signal is an NTSC composite video signal or separate luminance (Y) and
chrominance (C) signals, you can correct the color and level of the input signal to a
certain extent on the INPUT SETUP menu.
Note
You cannot adjust an image once it has been stored in memory. Restore an image
after adjustment.
1
2
2
3
When the memory image is displayed on the screen, press the SOURCE/
MEMORY button.
The image from the video source appears.
Press the MENU button, then select
INPUT SETUP menu by pressing the ı
or ∫ button.
1
I NP U T SE T UP CO L OR n n n
/ P I X / L A Y / P R N / I N / OUT /
I NP U T SE L V IDEO / SV
H U E 0
CO L OR 0
G A I N 0
O F F S E T 0
A GC
O F F / ON
Q 1 A 1 S
Switch IN to green by pressing
the ı or ∫ button. INPUT
SETUP menu appears.
Continue to next page m
Installation and Adjustment
57