Table of Contents
Advertisement
JTA-LS200 ABC sensor unit
1
2
3
4
1 ABC (Automatic Brightness Control) sensor
Senses the ambient light.
2 IN connector (Round type, 17-pin)
When two or more ABC sensor units are used in the
system, connect the first sensor unit to the CONTROL
1/LS connector of the ICU. Connect the second sensor
unit and others to the OUT connectors of other sensor
units.
3 OUT connector (Round type, 17-pin)
Connect to the IN connector of another ABC sensor
unit.
4 Connector cap
Put the cap on the OUT connector when it is not used.
13
Locations and Functions of Parts and Controls
Table of Contents
Advertisement
Table of Contents
