Fault tracing
Contents of this chapter
This chapter provides general diagnostics and troubleshooting tips.
Fault tracing
This table describes the status LEDs of the emergency stop safety relay [A61].
LED
Color
LED is lit and steady
ON
Green
Power supply is connected.
ERR
Red
System error. Replace the unit if
the error is not removed after re-
start.
K1/K2
Green
Relays K1 and K2 are energized
(instantaneous contact).
K3/K4
Green
Relays K3 and K4 are energized
(delayed contacts).
This figure describes the ERR LED indications in fault situations.
LED is lit and flashing
-
During external errors. See the
figure below for details.
During external errors.
During the time delay.
Fault tracing 33
7
LED is not lit
Power supply is not
connected.
-
-
-