Routine Maintenance; Check The Print Quality - Brother MFC-T910DW Reference Manual

A

Routine Maintenance

Check the Print Quality

If faded or streaked colours and text appear or
if text is missing on your printouts, the print
head nozzles may be clogged. Print the Print
Quality Check Sheet and look at the nozzle
check pattern.
1
Press Settings.
2
Press a or b to select the following:
a. Select [General Setup].
Press OK.
b. Select [Maintenance]. Press OK.
c. Select [Impr. PrintQuality].
Press OK.
d. Select [Impr. PrintQuality]
again. Press OK.
3
Press c.
The machine prints the Print Quality
Check Sheet.
4
Check the quality of the four colour
blocks on the sheet.
5
The LCD asks about the print quality. Do
one of the following:
• If all lines are clear and visible, press
d to select [No].
The Print Quality check finishes.
• If lines are missing (see Poor,
below), press c to select [Yes].
OK
Poor
6
The LCD asks you to check the print
quality of each colour. Press d or c to
select the pattern (1–4) that most
closely matches the printing result, and
then press OK.
7
Do one of the following:
• If print head cleaning is needed,
press c to start the cleaning
procedure.
• If print head cleaning is not needed,
the Ink or Maintenance screen
reappears on the LCD.
8
After the cleaning procedure is finished,
the LCD asks if you want to check the
print quality again.
Press c [Yes] to start the print quality
check.
9
Press c again.
The machine prints the Print Quality
Check Sheet again. Check the quality of
the four colour blocks on the sheet
again.
If you clean the print head at least five times
and the print has not improved, try cleaning
the print head again up to three more times. If
the print has not improved, contact Brother
customer service or your local Brother dealer.
14