Overview - Epson S5U1C17F57T Manual

1.

Overview

The S5U1C17F57T1 (SVT17F57: Software eValuation Tool for S1C17F57) and the S5U1C17F57T2(SVTmini
17F57: Software eValuation Tool for S1C17F57)
Epson single-chip microcontroller S1C17F57.
The S5U1C17F57T1 is composed of a CPU board and a peripheral board. In the CPU board, an IC socket for the
S1C17F57, extension connectors, debug connectors for the S1C17F57 and others are built-in. In the peripheral
board, an EPD (Electrophoretic Display) panel, EPD panel connectors, EPD panel connector pads, a buzzer, a
tact switch and others are built-in. These make it possible to perform the functions such as the EPD drive display,
buzzer rumbling and switch input.
The S5U1C17F57T2 is composed only of the CPU board that is used in the S5U1C17F57T1, and can be
applicable for various applications using the extension connectors.
1) CPU
2) Power supply voltage
3) CPU clock
4) Built-in devices
CPU board:
Peripheral board:
5) Accessories
6) Operating temperature
range
7) Operating voltage
range
*1: The S5U1C17F57T1 is a package of the CPU board and the peripheral board, and the S5U1C17F57T2 is a
package only of the CPU board.
S5U1C17F57T Manual
(Rev.1.1)
*1
are evaluation and development support boards for the Seiko
S1C17F57 (QFP15-128)
External power supply (DC3.0V)
Coin battery (CR2032: 3.0 V) (inserted in the battery folder)
OSC1 : 32.768kHz crystal oscillator
OSC3 : 4.000MHz crystal oscillator
IC socket for S1C17F57 (S1C17F57 is inserted)
Crystal oscillator
Reset switch
Extension connector
LED
USB interface and connector
Jumper switches for various settings
EPD panel connectors and connector pads
EPD panel (DM-EPS2)
Tact switches
Buzzer
Power supply switch
Jumper switches for various settings
Jumper switch × 3
Power supply cable
5 °C to 35 °C
2.0 V to 5.5 V
Seiko Epson Corporation
1. Overview
1