Moving The Pattern In Parallel; Moving The Pattern In Parallel (When The First Stitch Is The Sewing Start Point) - Brother BAS H Series Instruction Manual

CHAPTER 3 PROGRAMMING PATTERNS

Moving the pattern in parallel

The following describes how to move the pattern in parallel when the first stitch is the sewing start point.
1. Carry out step 8 in "Programming procedure" (page
20).
2. Touch .
3. Touch .
70
4. Use
which you would like to edit.
5. When you press the
change to red lines and it will be selected.
6. Press
7. Use the jog key to move the cursor
X-axis to position A.
8. Press
The 1st stitch will move to position A.
9. Carry out steps 6 and 7 in "Programming procedure"
(page 19, 20).
BAS H series, Programmer
to position the cursor
key once, the outline will
.
.
at the outline
along the