When Using The Programmer Alone; Precautions On Disassembly, Assembly, And Part Replacement - Brother BAS H Series Instruction Manual

CHAPTER 2 SETTING UP YOUR PROGRAMMER

When using the programmer alone

Be sure to use an AC adapter that complies with the safety standards in the country of use.
Otherwise, it may cause fire or electric shocks or problems with correct operation.
Purchase an AC adaptor conforming to the specifications below.
OUTPUT: 24 VDC, 0.5A
Polarity:

Precautions on disassembly, assembly, and part replacement

Do not disassemble or modify the programmer, otherwise it may cause fire or electric shocks or problems with
correct operation.
Ask the place of purchase or a qualified technician to carry out any internal inspections, adjustments or repairs
that may be required.
(Any problems with correct operation that occur as a result of the customer attempting to disassemble or modify
the programmer will not be covered by the warranty.)
For preventing the internal wiring from being damaged, considerable care must be taken when assembling and
・
disassembling the case.
For preventing the internal wiring from getting caught in the case or other parts, care must be taken when
・
assembling the case.
Be sure to use a torque of 0.5 N/m when tightening screws.
・
Using excessive torque may damage the case.
6
WARNING
1.5mm
Φ5.5mm
9.5mm
WARNING
BAS H series, Programmer
Φ2.1mm
OUTPUT
DC24V
0.5A
3670B
3671B