Saving And Recalling Custom Panel Setups With Registration Memory - Yamaha Clavinova CVP-809 Owner's Manual

Saving and Recalling Custom Panel Setups with Registration Memory

Registering Your Panel Setups
1
Set up the panel controls (such as Voice, Style and so on) as desired.
Refer to "Parameter Chart" in the Data List on the website (page 9) for a list of parameters that
can be registered with the Registration Memory function.
2
Press the [MEMORY] button in the REGISTRATION MEMORY section to call up
the Registration Memory window.
Selecting the items to be registered
Touching [] at the bottom left of the window calls up the list for selecting the items to be registered.
Before going on to step 3, enter or remove checkmarks by touching the desired items. Items having
checkmarks will be registered.
3
Press the desired REGISTRATION MEMORY [1] – [8] button to which you wish to
memorize the panel setup.
Memorized buttons are lit in red, indicating that the number button contains data and its
number is selected.
NOTICE
If you select the button whose lamp is lit in red or green here, the panel setup previously memorized to the button
will be erased and replaced by the new settings. Hence, you should memorize panel setups only to buttons that are
turned off.
About the lamp status
Red:
• Data registered and currently selected
Green:
• Data registered but not currently selected
Off:
• No data registered
4
Register various panel setups to other buttons by repeating steps 1 – 3.
The registered panel setups can be recalled by simply pressing the desired number button.
NOTE
You can also disable recall of specific item(s) when calling up the registered panel setups: [Menu]  [RegistFreeze].
Displays or hides the list of items
CVP-809/CVP-805 Owner's Manual
8
87