Table of Contents
Advertisement
CVP-805 Assembly
CAUTION
• Assemble the unit on a hard and flat floor with ample space.
• Be careful not to confuse or misplace the parts, and be sure to
install all parts in the correct orientation. Please assemble the
unit in accordance with the sequence described here.
• Assembly should be carried out by at least two persons.
• Be sure to use only the included screws of the specified sizes.
Do not use any other screws. Use of incorrect screws can cause
damage or malfunction of the product.
• Be sure to tighten all screws upon completing assembly of each
unit.
• To disassemble the unit, reverse the assembly sequence.
Have a Phillips-head (+) screwdriver of the appropriate size ready.
Remove all parts from the package and make sure you have all
of the items.
Speaker box
Remove foamed styrol pads from the package, position them on
the floor, then place A on top of them. Position the pads so that
they will not block the speaker box on the bottom of A.
B
C
Bundled pedal cord inside here.
D
F
6 x 20 mm x 10
G
4 x 12 mm x 2
H
4 x 20 mm x 4
J
4 x 10 mm x 2
E
Power cord
Cord holders x 2
Headphone hanger
1
Attach C to D and E.
1 Place C, D and E as shown in the illustration.
2 Untie and straighten out the bundled pedal cord.
Do not discard the vinyl tie. You will need the vinyl tie later
in step 5.
3 Secure D and E to C using four screws F.
Press D and E toward C while securing.
2
3
2
Attach B.
1 Align the holes on the upper side of B with the bracket holes
on D and E, then attach the upper corners of B to D and E
by finger-tightening two screws G. These screws will be
securely tightened in step 4-3.
2 Secure the bottom end of B using four screws H.
E
B
2
H
3
Mount A.
Be sure to place your hands at least 15 cm from either end
of A when positioning it. The projections on top of D and
E should be inserted to the holes on the bottom of A.
15 cm or further in
Projections
CAUTION
• Be extra careful not to drop the unit or let your fingers be
pinched by the main unit.
• Do not hold the main unit in any position other than the position
specified here.
CVP-809/CVP-805 Owner's Manual
3
4-
1
3
G
D
121
Advertisement
Table of Contents
