Power Led Blinking Timing Chart; No Power - Panasonic TH-L24XM6Z Service Manual

TH-L24XM6Z
6.2.

Power LED Blinking timing chart

1. Subject
Information of LED Flashing timing chart.
2. Contents
When an abnormality occurs, the protection circuit will operate and reset the unit to stand by mode. During this time, the
defective block can be identified by the number of blinking times of the Power LED on the front panel of the unit as follow:
6.3.

No Power

First check point
There are following 2 states of No Power indication by power LED.
1. No lit
2. Red is lit then turns red blinking a few seconds later. (See 6.2.)
Blinking Times
1 BACK LIGHT SOS
7 SUB 3.3V SENSE SOS
9 SOUND SOS
13 EMERGENCY SOS
Contents
12
Check point
LCD PANEL
P-Board
A-Board
A-Board
Speaker
A-Board