Connecting The Headphones - Sony Walkman NWZ-X1051 Operation Manual



Basic Operations and Screens

Connecting the headphones

Plug the headphones into the headphone jack of the player until they click into
place. If the headphones are not connected correctly, the sound does not play.
Headphones
Note
 The supplied headphones are exclusive to this player only. If you connect the supplied
headphones to another device, the sound may not play.
About the Noise Canceling function
The Noise Canceling function (  page 110) is enabled when using the
supplied headphones. The supplied headphones are exclusive to this player
only and cannot be used with other devices.
How to install the earbuds correctly
If the earbuds do not fit your ears correctly, low bass sound may not be heard
and the Noise Canceling function (  page 110) may not work effectively.
To enjoy better sound quality, change the size of the earbuds or adjust the
earbud position to fit your ears snugly.
At purchase, M size earbuds are installed. If the earbuds do not
fit your ears, try one of the other supplied sizes, S or L.
When you change the earbuds, twist to install them firmly on
the headphones to prevent the earbud from detaching and
remaining in your ear.
When the earbud is broken, purchase the optional earbuds
(EP-EX1).