Format; Usb Connection Mode - Sony Walkman NWZ-X1051 Operation Manual

1
1
Common Settings

Format

You can format the built-in flash memory of the player.
Notes
 If the memory is formatted, all data (songs, videos, photos, etc., including sample data
installed at the factory) will be erased. Be sure to verify the data stored in memory prior
to formatting and export any important data to the hard disk of your computer.
 Be sure not to initialize (format) the built-in flash memory of the player by using
Windows Explorer. If you have formatted with Windows Explorer, format again by using
the player.

From the Home menu, select
"Reset/Format"
"All data including songs will be deleted. Proceed?" appears.

Select "Yes."
"All data will be deleted. Proceed?" appears.
 To cancel the operation, select "No. "

Select "Yes."
When initialization finishes, "Memory formatted. " appears.
 To cancel the operation, select "No. "

USB Connection Mode

When connecting to a computer by the USB cable, some computers may fail to
establishing the USB connection with the player, causing the player to not
display "Connecting. "
In such case, you can display the USB connection standby screen before
connecting so that the USB connection is established with more reliability.

From the Home menu, select
"USB Connection Mode."
"Use when USB connection cannot be established. Use this mode?"
appears.

Select "Yes."
The player enters USB connection standby mode, displaying the USB
connection standby screen. After connecting to a computer via the USB
cable, "Connecting" appears.
(Settings)

"Format."
(Settings)

"Common Settings"

"Common Settings"

