Validation; Validation When Creating An Application Configuration - ABB Relion 630 Series Engineering Manual

Section 5
Protection and control engineering
5.1.7
5.1.7.1
62
IEC09000613 V2 EN
Figure 40: ACT: HW signal channels

Validation

Validation checks the application configuration for errors based on the rules that
govern the creation of the application at three different times.
• During the logic creation, while making a connection or placing a function block
• On demand by starting the validation
• When writing the application configuration to the protection relay

Validation when creating an application configuration

Validation is made when creating the application configuration.
• A connection between two input or two output signals is not possible
• A connection between two different data types is not possible: for example, from
a binary output to an analog input
1MRS756800 F
IEC09000613-2-en.vsd
630 series
Engineering Manual