Section 5 Protection And Control Engineering; Application Configuration Tool - ABB Relion 630 Series Engineering Manual

1MRS756800 F
Section 5
5.1
630 series
Engineering Manual
Protection and control engineering

Application Configuration tool

The Application Configuration tool is used to create the application configuration for
an IED. The application configuration is built up with function blocks that are
dedicated for different functionality.
• Preprocessing blocks
• Control related functions
• Protection related functions
• Monitoring functions
• Communication
For more information about function blocks see the technical manual.
Some function blocks are mapped as logical nodes according to the IEC 61850
standard. See the IEC 61850 communication protocol manual for more information.
Other function blocks are not mapped as logical nodes.
• Logical gates
• Timers
• LEDs
• Function keys
The Application Configuration tool has some basic general features.
• Organization of an application configuration
• Organizing an application configuration into a number of logical parts
(MainApplication)
• Organizing a MainApplication over a number of pages
• Features to program an application configuration
• Inserting function blocks, making connections and creating variables
• Including hardware IO channels directly in the application configuration
• Setting function blocks and signal visibility to Signal Matrix and Parameter
Setting
Protection and control engineering
Section 5
53