Maintenance & Troubleshooting - Honeywell Eclipse ImmersoPak IP005 Operating Instructions Manual

NOTE: Gas pressure at low fire will be too low to measure
and verify the fuel settings.
6. Cycle burner from high to low (if applicable) several
times to check repeatability of settings.
7. Readjust burner if the settings do not repeat as
expected. If necessary, refer to Chapter 5,
Maintenance & Troubleshooting.
8. Record all setup data as an aid for future
troubleshooting and setup operations.
■ Do not turn the combustion air blower off
immediately.
■ Allow time for the process to cool. This will
prevent hot gases from back flowing into the
burner and blower causing damage to the burner.
9. Stop the burner.
32-00055—01
CAUTION
13