Specifications; Intended Use - Makita DLW140 Instruction Manual

SPECIFICATIONS

Model:
Wheel diameter
Hole diameter
Max. wheel thickness
No load speed
Rated voltage
Dimensions
(L x W x H)
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
• The shape and weight vary depending on the specifications which differ country to country.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Wear safety glasses.
Read instruction manual.
Only for EU countries
Ni-MH
Li-ion Do not dispose of electric equipment or
battery pack together with household
waste material! In observance of the
European Directives, on Waste Electric
and Electronic Equipment and Batteries
and Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws, electric
equipment and batteries and battery
pack(s) that have reached the end of
their life must be collected separately and
returned to an environmentally compatible
recycling facility.
With European type safety guard
With safety guard other than
European type
With center cap type safety guard
With European type safety guard
With safety guard other than
European type
With center cap type safety guard
537 mm x 290 mm x 640 mm
537 mm x 280 mm x 640 mm
537 mm x 280 mm x 640 mm
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF

Intended use

The tool is intended for cutting in ferrous materials with
appropriate abrasive cut-off wheel. Follow all laws and
regulations regarding dust and work area health and
safety in your country.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-3-10:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
WARNING:
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-3-10:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
2 ENGLISH
DLW140
355 mm
25.4 mm
3 mm
-1
3,800 min
D.C. 36 V
17.2 - 17.8 kg
15.6 - 16.3 kg
15.4 - 16.0 kg
) : 103 dB(A)
pA
) : 115 dB (A)
WA
2
) : 2.5 m/s
h
2