Related Manuals for Kenwood CR-ST50DAB
Summary of Contents for Kenwood CR-ST50DAB
- Page 1 DAB+ Stereo Compact Radio CR-ST50DAB OPERATING INSTRUCTIONS JVCKENWOOD Corporation...
-
Page 2: Table Of Contents
Before start-up Content Before switching on the power supply Safety instructions Before start-up Connect Component names and functions Basic functions Turning on the system Switching off in standby Volume control Navigate in the menus Setting the menu language Setting the time Additional settings in the "Time"... -
Page 3: Before Switching On The Power Supply
5. Power supply – This device may only be connected to the mains voltage with the supplied mains adapter. Use this adapter for the Compact Radio CR-ST50DAB only. In any case, make sure that the local mains voltage matches the specifications on the mains adapter. If you are unsure about the type of power supply in your home, contact your specialised dealer or power company. - Page 4 10. Maintenance – Never attempt to carry out the maintenance of this device yourself, because live parts can be exposed through the openings or by removing covers, contacting which can be hazardous. Leave all maintenance to qualified service personnel. 11. Damage requiring repair – Maintenance and repair work should only be carried out by a qualified customer service. Maintenance/repair is required if the device has been damaged (e.g. the mains adapter) if liquid has entered the device, if objects have entered the device, if the device has been exposed to rain or mois- ture, when it stops working properly or has fallen down.
- Page 5 - or leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; - or a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. EU Declaration of Conformity Hereby, JVCKENWOOD Corporation declares that the radio equipment type CR-ST50DAB complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the follow- ing Internet address: http://www.kenwood.com/cs/eudoc/ Manufacturer: JVCKENWOOD Corporation 3-12. Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAN...
-
Page 6: Before Start-Up
Before start-up Unpacking Carefully unpack the device and make sure all accessories are present: Operating instructions Mains adapter Inserting Batteries (not included) • Insert 4 R6 / AA / Mignon batteries into the radio, observing the correct polarity (+ and -). • The power supply via the batteries is switched off when the power is supplied via the mains adapter. -
Page 7: Component Names And Functions
Components and functions Control elements Front side 1 - Display 2 - FM / DAB + antenna 3 - Line-in port 4 - Headphone port 5 - Power supply connector Backside Top view 1 - TUNE/AUTO/ENTER/uIl 2 - Standby/On/Source 3 - Menu 4 - Info 5 - Preset - 6 - Preset + 7 - Volume 8 - Station buttons (1 - 4) 9 - Memory button... -
Page 8: Basic Functions
Basic functions " Turn on the radio: Press the button on the radio. " Switching off in standby Press and hold the button on the radio. The display briefly shows "Standby” and the device switches to standby mode. The time will still be displayed. Volume control Turn the “VOL”... -
Page 9: Setting The Display Illumination
Setting the display illumination The display illumination can be programmed in 3 brightness levels. The following settings can be made in the “Backlight” menu: “On level”: Brightness of the display when the radio is switched on. Choices: “High” / “Medium” / “Low” “Dim level”: Brightness adjustment for operation and standby. Choices: “High” / “Medium” / “Low” “Timeout”: Time until the display is adjusted to the lighting level in the "Dim setting". -
Page 10: Using The Dab + Radio
Setting the alarm clock The CR-ST50DAB can be set to 2 different alarm times. Furthermore, the alarm clocks can be pro- grammed for the following time blocks: "Daily" / "Once" / "Weekend" / "Weekdays". To set the alarm time, please proceed as follows: " 1. Turn on the radio and confirm with the button to select the FM source. 2. Press the <MENU>, button, select the „System“ menu using <TUNE/AUTO/ENTER/uII> and then press the knob. -
Page 11: Selecting A Dab + Station
Manual tuning of ensembles • Press the <MENU> button to enter the DAB menu. • Turn the <TUNE/AUTO/ENTER/uII> knob until “Manual tune” appears in the display. • Pressing the knob confirms the function and the currently set station with the corresponding frequency is shown in the display. • Turn the <TUNE/AUTO/ENTER/uII> knob to manually select another channel. •... -
Page 12: Expanded Dab + Information
Expanded DAB + information With DAB + additional information is transmitted in addition to the music signal. These can be retrieved as follows. Press the <INFO> key to retrieve the following information in succession: • Signal level: Shown on the display by means of icons from left to right. The more icons displayed, the better the reception. -
Page 13: Storing Stations In The Station Memory
Usage of Radio Data System (RDS) RDS is a broadcast system in which FM stations transmit useful information along with the actual broadcast signal. These can be extracted from the normal transmit signal and used for a number of additional functions. If an RDS signal is received, after some time the station name will be displayed instead of the frequency, and radio text will be displayed in the bottom line of the display (if support- ed by the station). RDS functions The following information can be retrieved by repeatedly pressing the <INFO> key: •... -
Page 14: Using Bluetooth
“Not Connected” will flash in the display and “Pairing” will sound. Pair BLUETOOTH devices The BLUETOOTH function allows the wireless transmission of music files (audio streaming) to the system. To pair devices (such as smartphones), proceed as follows: 1. Open the pairing function on your BLUETOOTH device and search for “CR-ST50DAB”. 2. Select “CR-ST50DAB” for pairing and wait until “Connected” appears in the display and “Device connected” is heard. The pairing is now complete. 3. If your BLUETOOTH device asks for a 4-digit PIN, please enter “0000”. 4. The BLUETOOTH device is now stored and will automatically be paired in the future. 5. To connect another BLUETOOTH device, please repeat steps 1 - 3. -
Page 15: Troubleshooting
Troubleshooting Please check the following points in case of malfunctions: No sound Plug in the power plug properly. Adjust the volume to the correct level. Make sure the desired source is selected. The system does not respond at the touch of a button ... -
Page 16: Disposal
Disposal Disposal of used electrical and electronic equipment and batteries. The crossed-out wheeled bin symbol on the product or its packaging indicates that this product must not be treated as normal household waste, but must be returned to a collection point for the recycling of electrical and electronic equipment and batteries. -
Page 17: Technical Specifications
Technical data CR-ST50DAB Power supply AC~ voltage 100 - 240 V 50/60 Hz DC Input 6.5 V / 1 A Power input in standby mode <1 watt Tuner FM/DAB + DAB tuning range BAND III 174.928 MHz – 239.200 MHz FM tuning range 87.50 MHz – 108.00 MHz BLUETOOTH BLUETOOTH version V5.0 Power class Class 2 Output power 4dbm Range approx.j 10 meters (may vary depending on the... -
Page 18: Guarantee
Dear Customer, Thank you for buying this Kenwood product. If, under normal conditions of use, this product should display defects in either the material or the workmanship, we will rectify these free of charge or replace the device in accordance with the below warranty conditions.