Troubleshooting; Remote Control - Sony KDF-50E2000 Operating Instructions Manual
50" 3 lcd rear projection television
Hide thumbs
Also See for KDF-50E2000:
- Operating instructions manual (200 pages) ,
- Specifications (2 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
Troubleshooting
If you
have
additional
questions,
service
needs,
or technical
assistance
related
to the use of your
Sony
TV,
please
visit
our website
or call one of the following
numbers:
http://www.sony.com/TVsupport
1-800-222-SONY(7669)
for US
1-877-899-SONY(7669)
for Canada
Remote
Control
Remote control
does not
[_
The batteries
could
be weak.
Replace
tile batteries.
operate
[_
Check
the orientation
of the batteries.
[_
Press TV (FUNCTION)
once, and the TV indicator
lights up. You may have
inadvertently
pressed
SAT/CABLE
(FUNCTION),
which changes
the remote
control
to SAT or CABLE
mode.
[_
Make sure this unit's power cord is connected
securely
to the wall outlet.
[_
Florescent
lamps can interfere
with your remote
control
operation;
try turning
off
the florescent
lamps.
[_
Keep the remote
control
sensor area clear t_oln obstacles.
[_
If the "High Temperature
Warning"
message
appears,
turn off the TV and wait
until the TV's projection
lamp cools down (approximately
5 minutes).
If the
remote
control
still does not work, make sure to dust the ventilation
slots on the
rear of the TV and the cooling
fan to provide
adequate
ventilation
aronnd
the TV.
Cannot
change
channels
with
[_
If you tire using the TV to change
channels,
first press TV (FUNCTION)
once,
the remote
control
and the TV indicator
lights
up.
[_
If you tire using another
device
to change
channels,
be sure you have not
inadvertently
switched
your TV from the channel
3 or 4 setting.
[_
If you tire using another
device
to change
channels,
be sure to press FUNCTION
for that device. For example,
if you are using your cable box to change
channels,
be sure to press SAT/CABLE
(FUNCTION)
once, and the SAT/CABLE
indicator
lights up.
Remote control
does not
[_
If you replaced
the batteries
to the remote
recently,
the code numbers
for the video
operate
non-Sony
video
equipment
may need to be reset.
equipment
[_
There
may be more than one code for the equipment
that you are attempting
to
operate.
[_
There
is a possibility
that some non-Sony
equipment
cannot be operated
by your
Sony TV remote.
You may need to use the equipment's
original
remote
control.
80
Advertisement
Table of Contents
