Honeywell M7215 Product Data

Damper motors

Hide thumbs Also See for M7215:

Download this manual

APPLICATION

M7215 Damper Motors provide 25 lb-in. torque with spring

return and 2-10 Vdc modulating control of economizer

systems, ventilation dampers and combustion air dampers

used in residential or commercial HVAC equipment.

® U.S. Registered Trademark

Damper Motors

FEATURES

• M7215 Damper Motors provide modulating control of

economizer dampers from a 2-10 Vdc controller.

• Quiet, high efficiency drive motor.

• High impact, glass-fiber reinforced plastic case is

rugged, lightweight and corrosion resistant.

• Provides 2-10 Vdc output signal proportional to the

shaft position.

Application ........................................................................

Features ...........................................................................

Specifications ...................................................................

Ordering Information ........................................................

Installation ........................................................................

Operation and Checkout ..................................................

M7215

PRODUCT DATA

Contents

63- 2556

Page 1 • Provides 2-10 Vdc output signal proportional to the shaft position. APPLICATION M7215 Damper Motors provide 25 lb-in. torque with spring return and 2-10 Vdc modulating control of economizer systems, ventilation dampers and combustion air dampers used in residential or commercial HVAC equipment.
Page 2: Specifications
Honeywell Inc., 1885 Douglas Drive North Minneapolis, Minnesota 55422-4386 (612) 951-1000 In Canada—Honeywell Limited/Honeywell Limitée, 155 Gordon Baker Road, North York, Ontario M2H 3N7. International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
Page 3 M7215 DAMPER MOTOR Table 1. M7215 Accessories. 4074EHB Screw Terminal Adapter—converts quick-connect terminals to screw terminals. Adapter can be used with or without 7640QF Terminal Enclosure. M17363 7640QF Terminal Enclosure—provides wiring enclosure for electrical terminal connections. Enclosure can be used with or without 40784EHB Screw Terminal Adapter.
Page 4 OPERATION AND CHECKOUT replace the motor. Controller Checkout The M7215 Damper Motor accepts input from a 2-10 Vdc controller. The motor can be checked out either directly or by 1. Adjust controller setpoint to call for cooling. Observe the using a controller.