Connecting To The Line 2 In Or Line 4 In Jacks - Sony RDR-HXD710 Operating Instructions Manual

Connecting to the LINE 2 IN or LINE 4 IN jacks

Connect a VCR or similar recording device to the LINE 2 IN or LINE 4 IN jacks of this recorder. If the
equipment has an S-video jack, you can use an S-video cord instead of an audio/video cord.
S-video cord
(not supplied)
to LINE 2 IN
z Hint
When the connected equipment outputs only monaural sound, connect only the L (MONO) and VIDEO input jacks
on the front of the recorder. Do not connect the R input jack.
b
Notes
• Do not connect the yellow LINE IN (VIDEO) jack when using an S-video cord.
• Do not connect the output jack of this recorder to another equipment's input jack with the other equipment's output
jack connected to the input jack of this recorder. Noise (feedback) may result.
• Do not connect more than one type of video cord between the recorder and your TV at the same time.
VCR, etc.
OUTPUT
S VIDEO VIDEO
AERIAL HDMI OUT
LINE 1 - TV
IN
DIGITAL OUT
COAXIAL
-AUDIO VIDEO
OUT PCM/DTS/MPEG/DOLBY DIGITAL
R L
OPTICAL
to LINE 4 IN
: Signal flow
AUDIO
L R
Audio/video cord
(not supplied)
LINE 3
S VIDEO -AUDIO VIDEO S VIDEO
LINE LINE
R L
COMPONENT
4 2
VIDEO OUT
IN OUT
VCR, etc.
DVD recorder (front)
(rear)
Y
P /
B
C
B
P /
R
C
R ~
AC IN
27