Parental Control (Password); Disc And Remote Control Settings/Factory Settings (Options) - Sony RDR-HXD710 Operating Instructions Manual

Parental Control
(Password)
This "Password" Setup allow you to set or to
modify the password that gives access to Parental
Control settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Password," and press ENTER.
The Password Setup Display appears
• If you have not yet set a password, the
display for registering a new password
appears.
Password
Enter a new password.
• When you have already registered a
password, the display for entering the
password appears.
Password
Enter your password.
If you wish to change your password, first
enter your current password using the number
buttons, then select "OK" and press ENTER.
The display for registering a new password
appears.
4
Enter your new four-digit password using
the number buttons, then select "OK" and
press ENTER.
b
Note
If you forget your password, you will have to reset it by
selecting "Parental Control" of "Factory Setup" in
"Options" setup (page 102).
OK
Cancel
OK
Cancel
Disc and Remote Control
Settings/Factory Settings
(Options)
The "Options" setup allows you to set up other
operational settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Options," and press ENTER.
The "Options" setup appears with the
following options. The default settings are
underlined.
SETUP
Settings Format DVD-RW :
Dimmer :
DTV Settings
Video Power Save :
Auto Display :
Audio
Features Command Mode :
Password Factory Setup
Options
Easy Setup
Format DVD-RW (DVD-RW only)
The recorder automatically starts formatting in
VR mode or Video mode, whichever is selected
below, when a new, unformatted DVD-RW is
inserted.
VR Automatically formats the disc in
VR mode.
Video Automatically formats the disc in
Video mode.
Dimmer
Adjusts the lighting of the front panel display.
Normal Bright lighting.
Power Low lighting. Turns off the
Save lighting when the power is off.
b
Note
When "Power Save" in "Options" setup is set to "On,"
the front panel display is turned off during standby
regardless of this setting.
VR
Normal
Off
On
DVD3
,continued 101