Advertisement
Quick Links
Combi Cluster
Two amazing laser effects in one unit!
M
A
N
U
A
1
200+ cluster beams with classic laser tunnels & flat beams
9 channel DMX512 operation with XLR DMX in and out
Pre-programmed moving patterns in Auto mode
For the latest instruction manual updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com
If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
Due to continuous product development, specifications and appearance are subject to change.
L
V
E
R
2
/
0
3
/
2
Cluster and classic beam laser effects
40mW green laser & 100mW red laser
Sound-to-Light, Auto and DMX512
Tough metal chassis
Adjustable hanging bracket
Fan cooled operation
Key operated power control
© COPYRIGHT LAMBA plc 2009. E&O E.
S
I
O
N
0
1
0
2
.
0
Advertisement
Related Manuals for KAM Combi Cluster
Summary of Contents for KAM Combi Cluster
- Page 1 For the latest instruction manual updates and information on the entire Kam range visit: www.kam.co.uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
- Page 2 To optimise the performance of this product please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. The Kam Combi Cluster Laser has been designed to create amazing laser effects. Please keep these user instructions in safe place for future reference.
- Page 3 Dipswitch #10 is used for DMX mode. And must be in off position Wireless remote control Switch the Combi Cluster wireless remote dip switch 9 and 10 on. A: on/off Button B: mode sound/auto/DMX C: Pattern/Colour red cluster/green gobos/red & green.
-
Page 4: Operation
AUTO Auto cycles the built-in programs without being controlled externally. It has no laser off. Refer to chart above to set desired auto mode DMX Control The system only accepts the DMX512 signal of international standard to control the system. The laser beam ON /OFF, laser pattern selection, running direction, beam speed and colour selection etc. -
Page 5: Technical Specification
2. Use standard XLR microphone cable chain your units together via the XLR connector on the rear of the units. For longer cable runs we suggest a terminator at the last fixture. 3. Assign a DMX address to each the unit using dipswitches 4.