Makita RP1110C Technical Information page 3

R
epair
(8) Remove retainer cover by taking off 2 pcs.of pan head screw M4x18 as illustrated in Fig.4.
(9) Separate motor bracket section from motor section by taking off 4 pcs. of tapping screw 5x35
as illustrated in Fig.4.
Motor section
(10)Set armature in No.1R039 armature holder, and hold the armature holder with vise
as illustrated in Fig.5. Remove retainer with spanner 32 or monkey wrench from armature shaft
by turning anti-clockwise.
1R039 Armature holder for vise : A= 41.5mm
(11)Hold motor bracket steadily. Remove the armature by pressing its shaft with arbor press.
Something to hold bracket
Armature
50
40
30
20
10
0
Pan head
screw M4x18
A
Tapping screw 5x35
Motor bracket section
Retainer
Retainer cover
Vise
Press with arbor press.
Motor bracket
P 3 / 6
Fig.4
Retainer
1R039 Armature holder
for vise
Fig.5
Fig.6