Cisco Nexus 9396PX Hardware Installation Manual page 33

Installing the Chassis
Statement 1006—Chassis Warning for Rack-Mounting and Servicing
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions
to ensure that the system remains stable. The following guidelines are provided to ensure your safety:
•
•
•
Step 1 Slide the power supply end of the chassis onto the bottom support rails that are installed on the rack.
Be sure that the sides of the chassis by the power supplies clips into the chassis stops on the bottom support rails and the
front mounting brackets come in contact with the rack (see the following figure).
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with
the heaviest component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing
the unit in the rack.
Cisco Nexus 9396PX NX-OS-Mode Switch Hardware Installation Guide
Installing the Chassis in a Four-Post Rack
23