Self-Diagnosis Display - If A Code Starting With An Alphabet Letter Appears - Sony Cyber-Shot DSC-P32 Operating Instructions Manual

Digital still camera
Hide thumbs Also See for Cyber-Shot DSC-P32:
Table of Contents

Advertisement

Self-diagnosis display
– If a code starting with an
alphabet letter appears
Your camera has a self-diagnosis display.
This function displays the condition of the
camera on the LCD screen using a
combination of a letter and four numerical
digits. If this occurs, check the following
code chart and take the corresponding
countermeasure. The last two digits
(indicated by ss)will differ depending on
the state of the camera.
Self-diagnosis display
100
Code
Cause
C:32: ss
There is trouble with your
camera's hardware.
C:13: ss
The camera cannot read or write
data on the "Memory Stick."
An unformatted "Memory Stick"
is inserted.
The inserted "Memory Stick"
cannot be used with your camera,
or the data is damaged.
E:61: ss
A camera malfunction that you
E:91: ss
cannot reverse has occurred.
E:92: ss
If your camera is not still functioning well
after trying the countermeasure a couple of
times, the camera may be repaired. Contact
your Sony dealer or local autholized Sony
service facility and inform them of the 5-
digit code.
Example: E:61:10
Countermeasure
Turn the power off and on again (page 20).
Re-insert the "Memory Stick" several
times.
Format the "Memory Stick" (page 44).
Insert a new "Memory Stick" (page 23).
Press the RESET button (page 91) located
inside the jack cover, then turn on the
camera again.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cyber-shot dsc-p52Cyber-shot dsc-p72Dsc-p32/p72

Table of Contents