Storing Images - Sony DSC Operating Instructions Manual

z Hint
If a message box appears indicating a communications problem, refer to steps 6 and 7 of
Connections and Settings, and perform the following steps:
•Decrease the baud rate.
•Confirm that the port settings are correct.
PNote
If an image has been read and any of the following actions taken, repeat the procedure
from step 1.
– Power to the MS Serial Port Adaptor has been turned off and back on.
– The cable has been disconnected.
– The "Memory Stick" was removed.
PNote
•After working with an image after viewing the List View, such as Single-Image viewing,
some time will be required to re-read the images.
•As the MS Serial Port Adaptor and PC are busy communicating until all image are read, do
not disconnect the cable during this period.
•If an error occurs, disconnect and then reconnect the PC serial Cable at the MS Serial Port
Adaptor side.

Storing Images

Please see page 91.
90-GB