Using The Zoom Feature; Changing The Lens Orientation - Sony DSC Operating Instructions Manual

Sony digital still camera operating instructions dsc-f505
Table of Contents

Advertisement

Available languages

Available languages

Using the zoom feature

Move the power zoom lever a little for a slower zoom. Move it
further for a faster zoom.
Using the zoom function sparingly results in better-looking recordings when you
record moving images.
"T" side: for telephoto (subject appears closer)
"W" side: for wide-angle (subject appears farther away)
Digital zoom starts to function when zoom exceeds 5 .
If you cannot get a sharp focus, move the power zoom lever to the "W" side until the
focus is sharp. You can shoot a subject that is at least about 31 1/2 (80 cm) away from
the lens surface in the telephoto position, or about 19 3/4 inch (50 cm) away in the
wide-angle position. When the subject is too close to focus on, refer to page 32.
The picture quality deteriorates as you go toward the "T" side. Set
DIGITAL ZOOM to OFF in the MENU settings. Otherwise the digital zoom activates
without notice (page 52).
Digital zoom does not work for moving images. The optical zoom works up to 5.

Changing the lens orientation

You can adjust the angle by turning the lens part upward up to 90 degrees and
downward up to 50 degrees.
MODE selector
W
W
T
The right side of the bar shows
the digital zooming zone.
90°
50°
T
W
T
W
Lens part
T
19-GB

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Cyber-shot dsc-f505

Table of Contents