Step 1 Preparing The Power Supply; Inserting The Battery Pack - Sony DCR-IP210 Operating Instructions Manual

Step 1 Preparing the power supply

Inserting the battery pack

Your camcorder operates only with the NP-FF70 battery pack.
(1) Slide OPEN in the direction of the arrow and open the battery compartment
lid.
(2) Insert the battery pack with its terminal side facing your camcorder.
(3) Close the battery compartment lid.
1 2 3
To take out the battery pack
Open the battery compartment lid and slide the lever to take out the battery pack.
Lever
Note
Your camcorder operates only with the NP-FF70 battery pack. You cannot use the NP-
FF50 battery pack.
17