Viewing Images Using Your Computer; Viewing Images On Your Computer - Introduction - Sony DCR-IP210 Operating Instructions Manual

— Viewing Images Using your Computer —
Viewing images on your computer
– Introduction
There are the following ways of connecting your camcorder to a computer in order to
view images saved on a "Memory Stick" or recorded on a tape on your computer.
To view images on a computer which has a Memory Stick slot, first remove the
"Memory Stick" from your camcorder and then insert it into the computer's Memory
Stick slot.
Camcorder
Connection
jack
USB jack
Tape image
i.LINK
(MICROMV
Interface)
"Memory
USB jack*
Stick" image
* When connecting to a computer without a USB jack
Use an optional floppy disk adaptor for Memory Sticks or a PC card adaptor for
Memory Sticks.
When purchasing an accessory, check its catalog beforehand for the recommended
operating environment.
When connecting to a computer, complete installation of the i.LINK driver, the
USB driver or the application softwares before connecting your camcorder to
the computer. If you connect your camcorder to your computer first, you will
not be able to install the i.LINK driver or the USB driver correctly.
For details about your computer's connectors and editing software, contact the
computer manufacturer.
Computer
Connection
environment
cable
requirements
USB cable USB connector,
(supplied) editing software
i.LINK (IEEE
i.LINK cable
1394), connector
(optional)
editing software
USB cable USB connector,
(supplied) editing software
Reference pages
For For
Windows Macintosh
users users
154 – 156
158 – 159
164– 168
153
154 – 157
160 172 – 174
169 – 171
151