Makita BJR181 Technical Information page 11

R
epair
[3] -7. Handle Section
DISASSEMBLING
See Fig. 29.
1) Removing Hook assembly.
2) Remove Handle R by unscrewing six 4x20 Tapping screws.
Fig. 29
Hook assembly
Be careful not to lose these two
M5 Square nuts.
ASSEMBLING
Do the reverse of the assembling steps.
Note: When assembling Lock-off button to the Handle section, do as illustrated in Fig. 30.
Fig. 30
Lock-off button
Handle L
Fit this convex with either of
the two concaves of Lock-off button.
Lock off button
Be sure to remove Hook assembly
before disassembling the handle section,
because this portion interferes with
the removal of Handle R.
Leaf spring
Fit the curled ends in
the rib on each handle.
P 11 /14
Handle R
Leaf spring