Power Save - Sony Glasstron PLM-S700E Operating Instructions Manual

AVLS (Auto Volume Limiter
System)
Turn the jog dial to set to
ON, then press the jog dial.
AVLS : ON
OFF
SEL EXEC
When AVLS is on, the volume does
not become louder than the level you
set even if you turn the VOL control.
MEGA BASS
Turn the jog dial to select
the desired value, then
press the jog dial.
2: Maximise the bass sound.
1: Boost the bass sound.
0: Normal bass sound.
MEGA BASS : 2
1
0
SEL EXEC

POWER SAVE

Turn the jog dial to set to
ON, then press the jog dial.
POWER SAVE : ON
OFF
SEL EXEC
When you take off the display unit
while the POWER SAVE is set to ON,
the POWER SAVING SENSOR (page
13) is activated and automatically
turns off the picture and sound. The
picture and sound resumes a few
seconds after putting the display unit
back on.
When POWER SAVE is set to ON,
you can monitor the status of the
Glasstron by checking the POWER/
POWER SAVING indicator.
Status POWER/ Picture
POWER
SAVING
indicator
Normal Lit in Normal
green
Power save Lit in No
mode orange picture
Note
The power saving function of the Glasstron
does not work together with the power
management function of your PC.
Power
consumption
100%
5%
continued
37
-GB